Download Instruction Sheet (for Dual Cartridge)

(For 250ml, single cartridge instructions see link in "other information" below)

Surface Preparation

1. Surfaces must be clean and dry before applying TrimBonder™ adhesive.

2. Apply TrimBonder™ adhesive directly to clean and dry PVC board surfaces.

3. For maximum adhesion roughen or abrade metal, wood and masonry surfaces prior to applying TrimBonder™ adhesive.

Cartridge

1. Unscrew retaining nut from top of cartridge. Remove nose plug.

2. Insert TrimBonder™ adhesive cartridge in gun.

3. Dispense until both part A (white) and part B (tan) flow freely.

4. Screw mix nozzle on cartridge. tip can be trimmed to increase flow of mixed adhesive.

5. Dispense TrimBonder™ adhesive through mix nozzle. Be certain mixed TrimBonder™ adhesive flows streak-free and white before applying to work surface.

• • If material flow slows or stops replace the mix nozzle
• • If the cartridge is not used for 8 minutes (at 72°F) replace mix nozzle
• • If flow of TrimBonder™ adhesive is continuous, nozzle can last for extended period of time

Typical Characteristics

• • Working time is 5 - 8 minutes at 72°F.
• • TrimBonder™ adhesive is tack-free in 18 - 20 minutes at 72°F.
• • Functional cure is achieved in 2 hours at 72°F
• • Working times and cure times are affected by the temperature of the adhesive.
• • Adhesive temperatures below 72°F extend the work, tack-free and functional cure time.
• • Adhesive temperatures above 72°F shorten the work, tack-free and functional cure time.

Shelf Life / Storage

Shelf life is based on storage between 55°F - 75°F. Prolonged exposure/storage above 90°F reduces product reactivity and stability. Shelf life can be extended when stored between 45°F - 55°F. Do NOT freeze.